高效界面剂_澳恒自流平水泥的配套产品_产品中心_澳恒公司 -高效界面剂-广州澳恒建筑装饰材料有限公司

您当前的位置：

产品名称：高效界面剂
性能特点：澳恒公司的高效界面剂具有很强的渗透功能，可渗透混凝土的毛细孔并封闭，同时，具有很
包装：20公斤/桶，5公斤/桶，
使用范围：混凝土地面，瓷砖面，旧金刚砂地面，1旧水磨石地面的界面处理。
参考用量：视基础地面的具体情况而定
0

高效界面剂

产品说明：AJ-100-1 高效界面剂是澳恒公司为高品质自流平水泥专门研发的一种高性能界面剂。该产品具有渗透性强，粘接力强，非成膜，与自流平水泥有很好的相容性等特点。对混凝土地面的毛细孔有很好的封闭作用，与瓷砖面等非吸收基面有很强的附着力，特别适用于面层自流平水泥等高品质自流平水泥的基础地面处理，正确使用可避免火山孔的出现和脱层现象的发生。另外，在自流平水泥基面上做自流平水泥，该产品对底层自流平水泥有很好的封闭效果，确保表面的自流平水泥不会出现火山孔。

Product Description: AJ-100-1 high efficiency interface agent is a high performance interface agent specially developed by Aoheng company for high-end self leveling cement. The product has the characteristics of strong permeability, strong adhesion, non film forming and good compatibility with self leveling cement. It has a good sealing effect on the pores of the concrete floor and a strong adhesion with the non absorption base surface such as the ceramic tile surface. It is especially suitable for the foundation floor treatment of high-quality self leveling cement such as the surface self leveling cement. The correct use can avoid the occurrence of volcanic pores and delamination. In addition, self leveling cement is made on the self leveling cement base, which has a good sealing effect on the bottom self leveling cement and ensures that the self leveling cement on the surface will not have volcanic holes.

适用范围：混凝土基面，瓷砖面，旧金刚砂地面，旧水磨石基面的界面处理。

Scope of application: interface treatment of concrete base, ceramic tile surface, old emery ground and old terrazzo base.

产品特性：渗透性好，封闭性强，附着力强，水性材料，乳白色。

Product features: good permeability, strong sealing, strong adhesion, water-based materials, milky white.

使用方法：

1. 施工前保持基础地面干燥（切莫用水淋湿地面）；

2. 将高效界面剂按（界面剂：水=1:1）的比例配好，第一遍用滚筒滚涂；

3. 待第一遍干固后（23℃以上一般在3小时后），按以上比例将高效界面剂倾倒在地面上用扫把扫开满涂，注意低洼处不要有积液；

4. 待高效界面剂完全干固后地面有微微光亮是即可进行自流平水泥摊铺；

5. 对于空隙率较多的地面，必要时涂刷第三遍。

Usage method:

1. Keep the foundation ground dry before construction (do not wet the ground with water);

2. The high-efficiency interface agent shall be prepared according to the proportion of (interface agent: water = 1:1), and the roller coating shall be used for the first time;

3. After the first dry consolidation (generally 3 hours after 23 ̊ C or above), pour the high-efficiency interfacial agent on the ground according to the above proportion.The broom shall be fully opened and coated, and pay attention to the low-lying area without liquid accumulation.

4. The self leveling cement can be spread when the ground is slightly bright after the high-efficiency interface agent is

completely dry and solid;

5. For the ground with more voids, brush for the third time if necessary.

界面剂-澳恒自流平水泥相关产品

自流平水泥摊铺前涂刷界面剂

用量：用量与基础地面的具体情况有关，对于理想的混凝土地面，约0.15kg/m²。

Dosage: the dosage is related to the specific situation of the foundation ground, about 0.15kg/m2 for the ideal concrete ground

包装规格：5公斤/桶，20公斤/桶。

Package specification: 5kg / barrel, 20kg / barrel.

注意事项：

1. 高效界面剂没有完全干固时，不要摊铺自流平水泥，否则，容易产生火上孔或脱层

2. 由于是水性材料，气温低或过于潮湿的环境，高效界面剂干固所需要的时间更长。

Matters needing attention:

1. Do not pave self leveling cement when high-efficiency interfacial agent is not completely dry fixed, otherwise, it is easy to produce holes on fire or delamination

2. Due to water-based materials, low temperature or too humid environment, the time required for dry consolidation of high- efficiency interfacial agent Longer.

高效界面剂